HCG Urine Test

1.Urinate into a clean, dry cup or container.

2.Remove the test strip from the foil pouch and familiarize yourself with the product.

3.Strip: With arrows pointing toward the urine, dip the test strip vertically in the urine for at least 10-15 seconds. Do not pass the maximum line(MAX) on the test strip when dipping the strip into the urine, Remove the test strip from the urine, place it on a non-absorbent flat surface and begin timing. See the illustration below.

Cassette: Hold the dropper vertically and transfer 3 full drops of urine to the specimen well (S) of the test cassette, and then begin timing. Avoid trapping air bubbles in the specimen well (S). See illustration below.

Midstream: Do not urinate on the result window. If you prefer, you can urinate into a clean and dry container, then dip only the absorbent tip of the midstream test into the urine for at least 10-15 seconds. Do not pass the arrow on the midstream when dipping the midstream into the urine. After removing the midstream test from your urine, immediately lay the midstream test on a flat surface with the Result window facing upwards, and then begin timing.

4.As the test begins to work, you may notice a light colored flow moving across the test line region (T) and control line region (C) on the test strip. Read the result at 3 minutes. If no colored line appears, wait 1 minute longer. Some positive results may be observed in 1 minute or less depending on the concentration of hCG. Do not read the result after 10 minutes.